Home » Events

Events

Current Events

November 25, 2016 – 3D Hubs Toronto Makerspace Crawl #3
– Our Makerspace Crawl is a monthly visit to a different makerspace in the GTA. This 3rd edition will join GTA Robotics to visit NewMakeIt, a collaborative makerspace and coworking space. Founded in 2016 by four local enterprising entrepreneurs (including our Maker-in-Chief Peter), NewMakeIt is a nonprofit organization dedicated to helping creative professionals achieve their goals cost-effectively by providing them with the interactive training and workshops they need to refine their concepts and works, and the physical space, tools, and technology to build the products, digital services, or artworks they envision. To attend this event, you must RSVP to the 3D Hubs Makerspace Crawl page here.

December 3, 2016 – Global #3DPrintingDay
– Annual 3D Printing Showcase at Makerwiz. Visit us to learn more about #3DPrinting and #3DScanning!

 

Past Events

October 28 – 30, 2016 – TAVES Consumer Electronics Show
– Canada’s largest consumer electronics trade show. Makerwiz will have demos at our display booth and a workshop on “Your 3D Scanning Self” at the show.

October 26, 2016 – 3D Hubs Toronto Makerspace Crawl #2  / Ylab Open House: October
– Our Makerspace Crawl is a monthly visit to a different makerspace in the GTA. This 2nd edition will feature ylab, a social club-style makerspace located in the basement of the historic David Dunlap Observatory in Richmond Hill. Come meet other 3D printing enthusiasts and fellow makers during the Open House and enjoy the Debate “Laser Cutter vs. 3D Printer: Which is Best?” Which side are you on? To attend this event, you must register both here and here.

October 22, 2016 – MakeIt! Expo 2016 at the VPL
– First annual MakeIt! Expo organized by Vaughan Public Libraries, held at the Pierre Berton Resource Library.

October 17-18, 2016 – Ontario Public Library Week Celebration at the WSPL
– Makerwiz will demonstrate 3D Printing from 4-6 pm on both days at the Whitchurch-Stouffville Public Library.

October 15-16, 2016 – Maker Faire Ottawa
– Makerwiz will have a booth at MFO, Canada’s first full-featured Maker Faire. We will be discussing the topic “World of Sculptures”.

September 30, 2016 – Pecha Kucha Markham Vol 12
– Join us to hear our Maker-in-Chief Peter talk about 3D printing his favourite UNESCO World Heritage Sites.

September 29, 2016 – 3D Hubs Toronto Makerspace Crawl #1 / Make Friends Monthly: September
– It’s a new season, so the old Pub Nites are all done! Our new Makerspace Crawl is a monthly visit to a different makerspace in the GTA. This inaugural edition will feature the brand new Raw Finery Studio, a tech space for fashion. Come meet other 3D printing enthusiasts and fellow makers, discuss the intersection of fashion and technology, and show off your favourite LED! To attend this joint event with Make Friends Monthly, you must register both here and here.

September 24-25, 2016 – Science Literacy Week Celebration at the MPL 
– Makerwiz will discuss 3D Printing and Science Education on Sunday 1:30-3:30 pm at the Angus Glen Library, Markham Public Library.

August 17, 2016 – 3D Hubs Toronto Monthly Meetup #12
– 12th monthly meetup for 3D printing enthusiasts, from beginners to pros at Fox and Fiddle York Mills.

July 5-28, 2016 – Portraits of Giving 2016 Exhibit Tour
– 3D portraits created by Makerwiz on exhibition at King Township Museum & Cultural Centre.

July 26, 2016 – Imagine It and 3D Print It
– 3D Design/Printing workshop at NewMakeIt makerspace in Newmarket.

July 19, 2016 – Exploring 3D Resources Online
– 3D Design workshop at NewMakeIt makerspace in Newmarket.

June 15-July 17, 2016 – Toronto Maker Festival Month of Making
–  Makerwiz will host four satellite events and present at the Extravaganza this year. See below for more details.

July 17, 2016 – 3D Hubs The Future of Manufacturing Workshop
– 3D Printing Workshop for higher ed students at See-Scape.This event is a satellite event of the Toronto Maker Festival.

July 12, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

July 9-10, 2016 – Toronto Maker Festival Weekend Extravaganza
– Highlight of the Toronto Maker Festival held at the Toronto Reference Library. Makerwiz will display Project “Art Museums of the World” at the Toronto Reference Library.

July 5, 2016 – Intro to 3D Printing
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

June 28, 2016 – Imagine It and 3D Print It
– 3D Design/Printing workshop at NewMakeIt makerspace in Newmarket.

June 27, 2016 – 3D Hubs/SketchFab Scanner Party
– Learn about 3D Scanning and party with fellow makers at See-Scape. This is a satellite event of the Toronto Maker Festival.

June 26, 2016 – Hamilton Mini Maker Faire
– Makerwiz will display Project “World Heritage Sites” at the 2nd HMMF held at the Museum of Steam & Technology in Hamilton.

June 21, 2016 – Exploring 3D Resources Online
– 3D Design workshop at NewMakeIt makerspace in Newmarket.

June 20, 2016 – 2nd Annual 3D Printing Olympiad: Faster, Higher, Stronger
– A twist on the classic tower building team challenge hosted by Makerwiz. This year’s competition is a satellite event of the Toronto Maker Festival and also a celebration of summer solstice. –> POSTPONED

June 16, 2016 – 3D Hubs Toronto Monthly Meetup #11
– 11th monthly meetup for 3D printing enthusiasts, from beginners to pros at Fox and Fiddle York Mills. This edition is a satellite event of the Toronto Maker Festival.

May 30-June 17, 2016 – Portraits of Giving 2016 Exhibit Tour
– 3D portraits created by Makerwiz on exhibition at Aurora Public Library.

June 14, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

June 11-12, 2016 – Vancouver Mini Maker Faire
– Makerwiz will have a booth at VMMF, and our Maker-in-Chief Peter has been invited to speak on Sunday about “Preserving the Memories of World Heritage Sites”.

June 7, 2016 – Intro to 3D Printing
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

June 5, 2016 – Aurora Street Festival
– Makerwiz will celebrate this year’s festival with NewMakeIt.

May 31, 2016 – 3D Hubs “Co-polyester for 3D Printing” Workshop
– 3D Hubs/ColorFabb workshop at NewMakeIt makerspace in Newmarket.

May 26, 2016 – 3D Hubs Toronto Monthly Meetup #10
– 10th monthly meetup for 3D printing enthusiasts, from beginners to pros at Fox and Fiddle York Mills.

May 6 to 27, 2016 – Portraits of Giving 2016 Exhibit Tour
– 3D portraits created by Makerwiz on exhibition at Markham Public Library’s Markham Village Branch.

May 24, 2016 – Imagine It and 3D Print It
– 3D Design/Printing workshop at NewMakeIt makerspace in Newmarket.

May 17, 2016 – Exploring 3D Resources Online
– 3D Design workshop at NewMakeIt makerspace in Newmarket.

May 14, 2016 – What’s Up in Space Camp & STEM Contest
– 5th Annual Event organized by AstroNuts Kids’ Space Club and Royal Astronomical Society of Canada Toronto Centre.

May 10, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

May 3, 2016 – Intro to 3D Printing
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

April 29, 2016 – 3D Hubs Toronto Monthly Meetup #9
– 9th monthly meetup for 3D printing enthusiasts, from beginners to pros (notice meetup time has been changed to every 3rd Wednesday of each month, but this month is an exception).

April 26, 2016 – Imagine It and 3D Print It
– 3D Design/Printing workshop at NewMakeIt makerspace in Newmarket.

April 19, 2016 – Exploring 3D Resources Online
– 3D Design workshop at NewMakeIt makerspace in Newmarket.

April 12, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

April 13-17, 2016 – Portraits of Giving 2016 Exhibit Tour
– 3D portraits created by Makerwiz on exhibition at Davis Court, Upper Canada Mall.

April 5, 2016 – Intro to 3D Printing
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

March 29, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

March 22-24, 2016 – FABTECH Canada
– Canada’s leading exclusive fabricating, welding, metal forming and finishing event.

March 22, 2016 – Intro to 3D Design
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

March 16, 2016 – 3D Hubs Toronto Monthly Meetup #8
– 8th monthly meetup for 3D printing enthusiasts, from beginners to pros (notice meetup time has been changed to every 3rd Wednesday of each month, starting this month).

March 15, 2016 – Exploring 3D Resources Online
– 3D Design workshop at NewMakeIt makerspace in Newmarket.

March 8, 2016 – Intro to 3D Printing
– 3D Printing workshop at NewMakeIt makerspace in Newmarket.

March 3, 2016 – Imagine It and 3D Print It
– 3D Design/Printing workshop at NewMakeIt makerspace in Newmarket.

March 2, 2016 – NewMakeIt Open House
– First Open House at a brand new makerspace in Newmarket.

February 23, 2016 – Intro to 3D Scanning
– 3D Scanning workshop at NewMakeIt makerspace in Newmarket.

February 18, 2016 – Markham Board of Trade Young Professionals Networking Event 
– Networking for Young Professionals featuring guest speaker Peter Lau, MIC of Makerwiz.

February 9, 2016 – 3D Hubs Toronto Monthly Meetup #7
– 7th monthly meetup for 3D printing enthusiasts, from beginners to pros (every 2nd Tuesday of each month).

January 28, 2016 – MakerBot Executive Summit 2016
– Partners of MakerBot gather at their Brooklyn HQ for a one-day conference.

January 26, 2016 – 3D Hubs “Strong & Flexible” Workshop
– Special workshop on how to best use nylon in 3D printing. Stay tuned for details!

January 23, 2016 – MPL Family Literacy Fair 2016
– Makerwiz presents “Navigating 3D Resources Online” at noon at the Milliken Mills Library.

January 21, 2016 – Build a Makerspace
– The NewMakeIt space by York Region Makers is opening in Newmarket this month! This is the first comprehensive makerspace in York Region, with attached co-working facilities. Come find out what’s happening and how you can be involved!

January 9-11, 2016 – 3D Systems Global Partner Summit 2016
– Partners of 3DS all over the world gather at Bally’s in Las Vegas for a conference and celebration.

January 6-9, 2016 – International CES 2016
– World’s largest Consumer Electronics Show at Las Vegas, Nevada. Makerwiz will attend CES to connect with partners. Tweet us to meet up if you are attending!

December 13, 2015 – From Idea to Print: Creating Original 3D Designs & Printing Demo
– Fifth workshop in “3D Design and Printing” Series with Markham Public Library.

December 8, 2015 – 3D Hubs Toronto Monthly Meetup #6
– 6th monthly meetup for 3D printing enthusiasts, from beginners to pros (every 2nd Tuesday of each month).

December 3, 2015 – Global #3DPrintingDay
– Annual 3D Printing Showcase at Makerwiz. Visit us to learn more about #3DPrinting and #3DScanning!

December 2, 2015 – Introduction to 3D Scanning & Demo
– Fourth workshop in “3D Design and Printing” Series with Markham Public Library.

November 27, 2015 – Black Friday SALE Event
– One day only, In-Store and Online Sale.

November 25, 2015 – Introduction to 3D Design Apps
– Third workshop in “3D Design and Printing” Series with Markham Public Library.

November 19, 2015 – Finding Existing Designs
– Second workshop in “3D Design and Printing” Series with Markham Public Library.

November 10, 2015 – 3D Hubs Toronto Monthly Meetup #5
– 5th monthly meetup for 3D printing enthusiasts, from beginners to pros (every 2nd Tuesday of each month).

November 8, 2015 – Introduction to 3D Printing
– First workshop in “3D Design and Printing” Series with Markham Public Library.

October 30 – November 1, 2015 – TAVES Consumer Electronics Show
– Canada’s largest consumer electronics trade show. Makerwiz will have hourly demos at our display booth and a seminar on “Top 10 Trends in Consumer 3D Printing” at the show.

October 13, 2015 – 3D Hubs Toronto Monthly Meetup #4
– 4th monthly meetup for 3D printing enthusiasts, from beginners to pros (every 2nd Tuesday of each month).

September 8, 2015 – 3D Hubs Toronto Monthly Meetup #3
– 3rd monthly meetup for 3D printing enthusiasts, from beginners to pros (every 2nd Tuesday of each month).

August 11, 2015 – 3D Hubs Toronto Monthly Meetup #2
– 2nd Pub Nite for 3D printing enthusiasts at the Fox and Fiddle York Mills Pub.

August 1 & 2, 2015 – Maker Extravaganza
– Makerwiz will have an exhibition booth entitled “3D Printing: From Inner to Outer Space”.

July 31, 2015 – 3D Printing Olympiad
– This event, hosted by Makerwiz at the Markham Convergence Centre, is a high-tech team competition for prizes. Highly recommended for competitive teenage maers (age 19 or under).

July 29, 2015 – 3D Hubs ColorFabb Workshop
– This workshop at Hacklab.TO is for 3D printing enthusiasts and features specialty 3D printing filaments.

July 26, 2015 – Make Change Conference
– This conference is for makerspace organizers at the new STEAM Labs.

July 14, 2015 – 3D Hubs Toronto Monthly Meetup #1
– Inaugural Pub Nite for 3D printing enthusiasts at the Fox and Fiddle York Mills Pub.